Crestron 3-Series Control System®

Forsiden / Skjerm / Videotilbehør / Crestron 3-Series Control System®
Du må logge inn for å handle/se priser.
Crestron 3-Series Control System® (CP3)
Crestron 3-Series Control System® (CP3)
Crestron 3-Series Control System® (CP3)
Crestron 3-Series Control System® (CP3)

Crestron 3-Series Control System®

Varenr.:
CP3

Nyutviklet styringsprosessor som tillater et mye bedre brukergrensesnitt og raskere betjening. Enheten kan også drifte flere rom parallelt. Enheten har 3 x 232 porter, 8 rele utganger, 8 digitale innganer, 8 x ir utganger. Denne enheten kan styre opptil 10 rom parallelt.
Intility: Ikke på lager Distributør: På lager

A compact, rack-mountable 3-Series® control processor with immense power and numerous integrated control ports.

Control Engine

 

Core 3 OS; real-time, preemptive multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs

Memory

 

SDRAM

512 MB

 

Flash

4 GB

 

Memory Card

expandable storage up to 32 GB using MMC compatible card (not included)

 

External Storage

up to 1 TB using USB mass storage device (not included)

Communications

 

Ethernet

10/100 Mbps; auto-switching; auto-negotiating; auto-discovery; full/half duplex; industry-standard TCP/IP stack; UDP/IP; CIP; DHCP; SSL; IEEE 802.1X; SNMP; BACnet®/IP[1]; IPv4 or IPv6; Active Directory authentication; IIS v.6.0 Web Server; SMTP e-mail client; installer setup via Crestron Toolbox™ or MSIE[2]; supports all e-Control®, Core 3 UI™ XPanel, Crestron Mobile®, Crestron Fusion™ and RoomView® applications

 

Cresnet®

Cresnet master mode

 

USB

Supports USB HID and USB mass storage class devices via rear panel USB 2.0 host ports, supports computer console via front panel USB 2.0 device port

 

RS-232/422/485

For 2-way device control and monitoring, all ports support RS-232 up to 115.2k baud with software handshaking, one port also supports RS-422 or RS-485 and hardware handshaking

 

IR/Serial

Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud

Connectors & Card Slots

 

RELAY OUTPUT 1 – 8

(2) 8-pin 3.5mm detachable terminal block comprising (8) normally open, isolated relays;
Rated 1 Amp, 30 Volts AC/DC;
MOV arc suppression across contacts

 

I/O 1 – 8

(1) 9-pin 3.5mm detachable terminal block comprising (8) “Versiport” digital input/output or analog input ports (referenced to GND);
Digital Input: Rated for 0-24 Volts DC, input impedance 20k Ohms, logic threshold >3.125V low/0 and <1.875V high/1;
Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with “real world” loads;
Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 21k ohms with pull-up resistor disabled;
Programmable 5 Volts, 2k ohms pull-up resistor per pin

 

IR - SERIAL OUTPUT 1 – 8

(2) 8-pin 3.5mm detachable terminal block comprising (8) IR/Serial output ports;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud

 

COM 1

(1) 5-pin 3.5mm detachable terminal block;
Bidirectional RS-232/422/485 port;
Up to 115.2k baud; hardware and software handshaking support

 

COM 2 – 3

(2) 3-pin 3.5mm detachable terminal blocks;
Bidirectional RS-232 ports;
Up to 115.2k baud; software handshaking support

 

MEMORY

(1) MMC compatible card slot;
Accepts Multimedia Memory Cards (MMC) up to 32 GB for memory expansion

 

USB

(1) USB Type A female;
USB 2.0 port for storage devices

 

LAN

(1) 8-wire RJ45 jack;
10Base-T/100Base-TX Ethernet port

 

NET

(1) 4-pin 3.5mm detachable terminal block, Cresnet master port;
Outputs power to Cresnet devices if a power pack is connected to the 24VDC power input jack;
Receives Cresnet network power if no power pack is connected to the 24VDC power input jack;
See “Power Requirements” for additional specifications

 

24VDC 2.0A

(1) 2.1mm barrel DC power jack, 24 Volt DC power input;
PW-2420RU power supply included;
Passes through to NET port to power Cresnet devices;
See “Power Requirements” for additional specifications

 

G

(1) 6-32 screw, chassis ground lug

 

COMPUTER (front)

(1) USB Type B female;
USB 2.0 computer console port (6 ft cable included);
For setup only

Controls & Indicators

 

PWR

(1) Green LED, indicates operating power supplied from power pack or Cresnet network

 

NET

(1) Amber LED, indicates communication with the Cresnet system

 

MSG

(1) Red LED, indicates control system has generated an error message

 

HW-R

(1) Recessed pushbutton for hardware reset

 

SW-R

(1) Recessed pushbutton for software reset

 

LAN (rear)

(2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity

Power Requirements

 

Power Pack

2.0 Amps @ 24 Volts DC;
100-240 Volts AC, 50/60 Hz power pack, model PW-2420RU included

 

Available Cresnet Power

24 Watts (1 Amp @ 24 Volts DC) when using power pack

 

Cresnet Power Usage

15 Watts (0.625 Amp @ 24 Volts DC) when using Cresnet network power

Environmental

 

Temperature

41° to 113°F (5° to 45°C)

 

Humidity

10% to 90% RH (non-condensing)

 

Heat Dissipation

50 BTU/Hr

Enclosure

 

Chassis

Metal, black finish

 

Faceplate

Extruded metal, black finish, polycarbonate label overlay

 

Mounting

Freestanding or 1U 19-inch rack-mountable (adhesive feet and rack ears included)

Dimensions

 

Height

1.70 in (44 mm) without feet

 

Width

17.28 in (439 mm), 19.00 in (483 mm) with rack ears

 

Depth

6.56 in (167 mm)

Weight

 

3.12 lb (1.42 kg)

 



Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.