Please wait...
The product was added to the shopping cart. View shopping cart
About Intility Terms

CISCO 4PORT 10/100/1000 ETHERNET SWITCH INTERFACE CARD

Frontpage Network Equipment Switches CISCO 4PORT 10/100/1000 ETHERNET SWITCH INTERFACE CARD
You have to log in to shop/see prices.
CISCO 4PORT 10/ 100/ 1000 ETHERNET SWITCH INTERFACE CARD (EHWIC-4ESG=)

CISCO 4PORT 10/100/1000 ETHERNET SWITCH INTERFACE CARD

SKU:
EHWIC-4ESG=
EAN:
0882658351624
  • Product Module
  • Ports 4
  • Speed 1Gbps
Intility: In stock Distributør: Out of stock
Description

Cisco EtherSwitch 10/100/1000 EHWICs

Cisco EtherSwitch 10/100/1000 EHWICs enable a higher level of performance as well as enhanced PoE capabilties over earlier-generation of HWIC-based switches. Other benefits are advanced Layer 2 switching features for both data and IP communications, easy expandability, and simplified branch-office router management.

Specifications

Parameter

Specification

Form factor

• EHWIC-4ESG: Single-wide EHWIC form factor
• EHWIC-D-8ESG: Double-wide EHWIC form factor

Dimensions (H x W x D)

• EHWIC-4ESG and 4ESG-P: 0.8 x 3.1 x 4.8 in. (2.1 x 7.9 x 12.2 cm)
• EHWIC-D-8ESG and 8ESG-P: 0.8 x 6.2 x 4.8 in. (2.1 x 18.8 x 12.2 cm)

Weight

• EHWIC-4ESG: 79g (0.17 lb)
• EHWIC-4ESG-P: 108g (0.24 lb)
• EHWIC-D-8ESG: 149g (0.33 lb)
• EHWIC-D-8ESG-P: 196g (0.43 lb)

Standards

IEEE protocols

• Gigabit Ethernet: IEEE 802.3 and 10BASE-T
• Gigabit Ethernet: IEEE 802.3u, 100BASE-TX, and 1000BASE-TX
• IEEE 802.1d Spanning Tree Protocol
• IEEE 802.1p CoS for Traffic Prioritization
• IEEE 802.1q VLAN
• IEEE 802.1x Security
• IEEE 802.3x Full Duplex and Flow Control
• IEEE 802.3af Power over Gigabit Ethernet Standard

RFC

RFC 2284, PPP Extensible Authentication Protocol (EAP)

MIBs

• RFC 1213
• IF MIB
• RFC 2037 ENTITY MIB
• CISCO-CDP-MIB
• CISCO-IMAGE-MIB
• CISCO-FLASH-MIB
• OLD-CISCO-CHASSIS-MIB
• CISCO-VTP-MIB
• CISCO-HSRP-MIB
• OLD-CISCO-TS-MIB
• CISCO-ENTITY-ASSET-MIB
• CISCO-ENTITY-FRU-CONTROL-MIB
• BRIDGE MIB (RFC 1493)
• CISCO-VLAN-MEMBERSHIP-MIB
• CISCO-VLAN-IFINDEX-RELATIONSHIP-MIB
• RMON1-MIB
• PIM-MIB
• CISCO-STP-EXTENSIONS-MIB
• OSPF MIB (RFC 1253)
• IPMROUTE-MIB
• CISCO-MEMORY-POOL-MIB
• ETHER-LIKE-MIB (RFC 1643)
• CISCO-ENTITY-FRU-CONTROL-MIB.my
• CISCO-RTTMON-MIB
• CISCO-PROCESS-MIB
• CISCO-COPS-CLIENT-MIB
 

To obtain lists of supported MIBs by platform and Cisco IOS Software release and to download MIB modules, go to the Cisco MIB website.

Manageability

• SNMP and Telnet interface support delivers comprehensive in-band management, and a CLI management console provides detailed out-of-band management.
• An embedded RMON software agent supports four RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis.
• A SPAN port can mirror traffic from one or many ports to another port for monitoring all eight RMON groups with an RMON probe or network analyzer.
• Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading from a centralized location.
• Two LEDs per port provide convenient visual indication of the port link and PoE status.
• Crash information support enables a switch to generate a crash file for improved troubleshooting.
• Show-interface capabilities provide information about the configuration capabilities of any interface.

Connectors and cabling

• 10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted pair (UTP) cabling
• 100BASE-TX ports: RJ-45 connectors; two-pair Category 5 UTP cabling
• 1000BASE-TX ports: RJ-45 connectors; two-pair Category 5e and Category 6 UTP cabling

LED indicators

• Link status LED: One LED per port for indicating link status
• PoE LED: One LED per port system for PoE status indication

Power Requirements

Internal power supply

Optional PoE system power supply available for all Cisco 2900 and 3900 Series routers

External redundant power supply: Cisco Redundant Power System 2300 (RPS2300)

Optional for the Cisco 2911 through Cisco 2951 and Cisco 3900 Series routers

Internal redundant power supply

For the Cisco 3925, 3925E, 3945, and 3945E routers only

DC power support

• DC system power input available on the Cisco 2911, 2921, 2951, 3925, 3925E, 3945, and 3945E routers
• PoE option not available with DC system power input

Software suppor

Minimum Cisco IOS Software Release 15.1(2)T for Cisco 1900, 2900, and 3900 Series routers: IP Base License of the Universal image

Environmental

Operating temperature

32 to 104°F (0 to 40°C)

Operating humidity

10 to 90 percent, non-condensing

Nonoperating temperature

-4 to 149°F (-20 to 65°C)

Operating altitude

15,000 ft (4,570m)

Regulatory compliance, safety, and EMC

When installed in a Cisco 1941, 2900, or 3900 Series router, the Cisco Gigabit Ethernet EHWIC meets the standards (regulatory compliance, safety, and EMC) of the router itself. Refer to the data sheets for the Cisco 1921 and 1941 routers and the Cisco 2900 and 3900 Series routers for more details.

Please note that although care has been taken in the degree of relevancy, pictures are for display purposes only, and product appearance may differ from what you see. If there are any discrepancies between the product headline, description and picture, the correct information will be in the product headline (i.e. computer systems may not come with monitors even if pictured that way). If anything is unclear, please email support before placing your order.